Welcome to our latest gallery of Custom jewellery for 2015. There are over 18 galleries on the side column. All work is hand-made at the Bellchamber Rings Store in London Ontario Canada. Prices available on request.
 This stunning ring utilizes a client Claddagh design which was sleeved in a heavy hammered finish ring on the inside. It has over 1 carats of Tanzanites set into the Claddah. All items are made in our store by hand. ORDER. |
 Custom rings is our main specialty. These are simple half-round wedding rings in sterling silver, 3mm and 4.5mm wide and 2mm thick in the centre. ORDER. |
 Celtic Tree of Life Wedding set in Rose Gold. The 10mm version has flush white gold borders and the 8mm version is all Rose Gold. ORDER |
 A thinner interlace ribbon helps to this Eternity Triskele attain a modern look. Finished in 10mm and in White Gold. ORDER |
 A Three Oak Tree of Life ring set. One in yellow gold with raised platinum borders and the second a pierced white gold 5mm model. ORDER |
 The Ancient Amphreville Triskele pattern made into a tapering ring. Above is model R637 in yellow gold. It tapers from 7.5mm wide to 5mm wide at the back. It would look great with a gemstone or without. ORDER |
 The diamond Claddagh Engagement ring has the Muny Musk Triskele on the shank and the hands raised at the sides from the traditional claddagh. |
 Side view to show the modern style of setting. The heart shaped diamond is just over a 1/4 ct. The Crown of the claddagh ring is to be on the wedding band to be worn on top of the ring. ORDER |
 This Rampart Lion Pendant is based on the Royal Standard of Scotland. In this case it is pierced and finished in 14K Yellow gold. It is model 301 and measures 2.5cm tall with the O-ring. ORDER |
 This Rampart Lion Pendant is solid sterling silver. The back ground is antiqued to highlight the detail. ORDER |
 A pair of yellow Gold earrings in a style called the Bailey Triskele. Gold may be specially ordered. Sizewise they would fit inside a nickel. ORDER |
 This white gold Dianne Loveknot ring has a 1/2 ct Purple sapphire set in a bezel. The top porstion of it's interlace is pierced. ORDER |
 A custom Registered Nurse pendant. Our client brought this in to us and asked us to make it in silver about the diameter of a nickel 21mm. ORDER |
 A wedding set of Dianne Loveknot rings. The left has a 12x10mm fine jade cabochon. The right is an antiqued version of the R10 model and is 13mm at the widest point. These rings are off to the West Coast. ORDER |
 A custom ordered Chain ring design for a Team. We made 16 of these in silver. Jason hand made the curb chain link by hand and then soldered a Shank to the back of each ring. ORDER |
 Custom made wood texture ring to match clients original (right). Special cut bloodstone cabochons with a trapezoid top were made to fit. The wood texture makes for a very organic design. ORDER |
