Classic jewellery designs of modern styles.
Our client wanted us to create a ring for a retired firefighter. She brought us the design and together we created a square signet tapering ring with custom lettering and the numbers. The top of this signet is just under 15mm square and has an inside engraving as...
Our client wanted a version of her copper plated ring on the left made in rose gold. With some modifications we made a copy with slightly wider dots and waves. This one is finished in 14K Rose gold and is 3.5mm wide.
Set at Bellchamber's into pretty 4 claw gold ring, this gorgeous oval diamond weighs 1.02 carats. A very special engagement ring we made for our clients. Lab-grown diamonds do take work to create and are usually about forty to less than half of the price of a mined...
A very small bracelet needed to have a name engraved. The proud papa wanted a custom first letter with his own design and the other letters in an easy to read font. The bracelet is a gold baby bracelet which he brought us. This work was done in house at our shop.
Our client had a ring they inherited with some marquis shaped blue sapphires and small melee diamonds. We upcycled her yellow gold material in the new ring and reset her gemstones to make this more modern low profile design. It's a 6mm wide half-round which is a bit...
A 6mm Padparadscha Sapphire with a deep colour is set into a 4 claw yellow gold ring. Sapphires are found in every colour except red, that is when they are called Rubies. Sapphires are the 2nd hardest gemstone next to diamond and symbolize royalty, blessings and...
Hand engraving by a master graver can transform a ring or even give it new life. This ring was one a client brought us to size and commissioned us to add classic scroll work to three quarters of the shank and symmetrical leaf patterns on the top of shank too....
Welcoming a new life into the world is has many different traditions. A keepsake will mark that time. Ours are hand-made in our shop and come with a free engraving on the top (in either a script font or block font). They measuring 3cm long x 0.5cm wide and the solid...
Our client wanted a 0.50 carat white diamond to be set into a 1/2 bezel setting and a simple cable chain permanently attached to the bezel. We sourced a very fine E colour gem for her. Once we made the bezel we welded o-rings to the outside of the bezel and carved a...
Our client had a very nice story about finding a ring for his partner right in a stream bed right the time he wanted it. Sometimes it feels like the universe really does gives little nudges of help here and there. The ring he had was very special and had a pattern on...
We used a photo of a maple tree in a local park to create the motif on these rings. It's branches with custom arranged birthstones (2mm each) gypsy set in the same style. When ever you look at a ring you are reminded of so many things in this case your family, where...
DVM stands for Doctor of Veterinary Medicine. Our client wanted to made a simple band to commemorate the graduate in their family. SO we set out collaborating on a Veterinary graduate ring. It was to be between 5 and 6 mm wide with her favourite gemstones (pink...
Our Client wanted us to design a Memento Mori ring with skulls. The would alternate different profiles around the ring. Rubies were to be set into the eyes when if each was facing up. Pictured here is the yellow gold skull ring in 10K with diamond cut rubies repeating...
Bellchamber Rings offers hand and machine engraving on rings and other pieces of jewellery. If we do not hand make it, we must examine each item to be engraved before giving a go ahead. Most can be done in less than a week. Engraving styles range from standard block,...
Pictured are a custom set of Lucky Horseshoe wedding rings. They are both 14k yellow gold with a white gold horseshoe plate on the top set with 19 diamonds and finished with hand-engraving. In terms of scale the gents size is about the size of a quarter and the ladies...
Our client wanted the nickname "gypsy" for a personalized 18K yellow gold charm. This one could alternate as a bracelet or anklet. There is quite a bit of design layout to consider in the details of such a small charm; the font and characters should match and some of...
Forged rings like these are handmade and not cast from wax models. They are not produced en-masse by stamping machines either. These ones were made using fire and tools of steel, leather and wood. Some of the metal was from our clients own family gold material. They...
The Luckenbooth is an 18th-20th century Scottish Love charm. Antique versions utilize one or two hearts intertwined and capped with a crown. Scots and Highlanders could be a superstitious lot and a Luckenbooth was given as a token of love and protection. Usually made...
Our client, in this case, is an experienced metal detectorist. He found a 22k gold signet ring. He also found (near Sarnia ON) a solid gold 5 Franc Coin from 1859. An amazing find. This coin had traveled around the world! What was desired was a setting for the coin on...
Our client had a diamond she wanted us to use to set in a new ring. The new ring was going to be a copy of her single stone wedding ring (also pictured) here and would fit perfectly as a set. Jason hand carved a new model and it was cast in matching yellow gold. The...
Our client wanted to make something for her daughters with the gold and diamonds from her first wedding ring. We added 50% new gold to the client ring and made a long bar of 2.5mm x 1.6mm in yellow gold. That wire was used to hand make 3 rings 2.5mm wide. Jason set...
The modern symbol of love, the Heart was first seen in the 1200s in an illustration of a knight offering his heart to his lover. It is also recognized as the shape of Cupids arrow. Jason wanted to combine a heart and the Triquetra or Triskele interlace and make it...
A School Ring or Team ring made of gold will carry a lot of memories for the owner. Over decades the design can fade and the gemstone in the center may become worn. Often the stone is a vibrant coloured lab-made crystal called spinel. Synthetic spinel is 10x harder...
Our clients asked us to make rings using gold from gifted wedding rings in their family. The designs they chose are a hammered finish and the other with a slave ring design (pointed down). Made of solid yellow gold they are finished at just under 3mm wide each.
Our client wanted an octagon (emerald cut) faceted blue sapphire for her engagement ring. Together we designed this split shank design in white gold with hand engraving on each plane. Six gypsy set accent diamonds lead up the curve of the split shank. Emerald shaped...
This breathtaking design was suggested to us by our client who wanted us to incorporate some of her family gold materiel and gemstones. Its a nice size at 4cm in diameter and was made to fit with a 5mm omega chain. The large diamonds are from heirloom rings and one is...
Bellchamber's makes 2 widths of Irish Claddagh rings. The wide version (R304) has a 13mm heart and crown with a 5mm halfround ring shank. The smaller (R95) has a 9mm tall heart and crown with a 4mm halfround ring shank. Pictured are both models in Solid gold and...
A 'Dutch Button' ring in 14K yellow gold. Completely handmade at our shop. Our client ordered us to make a copy of a silver one she received as a gift. A design with a 400 year history, also known as a 'Zeeuwse knop'. This is a very unique gold ring.
This custom St.Andrews buckle is made of solid sterling silver and is a one of a kind. It's what is known as a Scottish Pipers cross belt mount, and is the terminal end. The finished weight was over 3 oz and measures 8x5 cm. It is one of the largest silver pieces...
A Rolling Ring in two-tone gold. The white gold and yellow gold rings are linked together to be worn as one. The 14K white gold band is hammered (3mm) and the yellow gold band (3mm) has a high polish mirror finish. These rings are custom made to order and with...
These custom wedding rings are made of 14K yellow gold with princess cut diamonds and amethysts. The bezel settings were very difficult to make and then set the stones at an even height all the way around. The design is a one of a kind wedding set for our client.
A Double Love Band with a white gold and yellow gold ring linked together. The 14K white gold band is hammered and the yellow gold is done iwth a full polish. A ring like this is made to order and can be done in custom gold combinations.
The Double Triskele ring in yellow gold with a 4 claw platinum setting containing a 1/2 carat diamond. A half carat diamond is about 5.2mm in diameter at its widest point. The number 3 to the Celtic represented the soul/eternity (past, present and future). Available...
This ring is a Bellchamber version of a split-shank ring with Celtic interlace protecting the gem setting. A triangular interlace called a Triquetra is mirrored on both sides of a claw style setting. The Triple spiral design in the centre of the interlace is known as...
A custom veterinary pendant with a rhino and red ruby set into the front. Custom designs are our specialty. Note that taking photos of silver pendants is difficult, it is similar to taking a photo of a mirror.