Gemstone Settings Custom Work Gallery

All Items
Client-designed Exotic-size Diamond Setting

Client-designed Exotic-size Diamond Setting

A Bellchamber specialty is setting exotic size gemstones. This one is a 1.5 carat diamond set into a client-designed ring.  Our client wanted a design with an off-center split-shank design which would fit perfectly on her finger. The setting is a bezel which...

Elegant 1920s/30s Gem Reset

Elegant 1920s/30s Gem Reset

An elegant two tone gold ring. A 2mm halfround band with a white gold bezel setting holding a 0.4 carat diamond. This one was a client's gemstone from her grandmother's ring which we reset into this new ring. The gem would have been cut in the 1920s or 30s

Gemstones Reset & Engraving

Gemstones Reset & Engraving

A client brought us her 3 stone setting with oval ruby and mine cut diamonds, the shank of which was in need of replacement. Pictured above is what we remade her; a new yellow gold band 2 mm wide, welded her 3-gemstone platinum setting to it and finished the sides...

Custom Family Ring with Birthstones

Custom Family Ring with Birthstones

Three 'Family rings' make a whole one-of-a-kind ring. They stack in a way our client designed so that the stones have a floral and organic feel, like a life long bouquet. The nine birthstones make up each member of the family. Each one is individually claw set in...

Choose your own gemstone

Choose your own gemstone

If a client wants us to source a gemstone we like to select 3 or 4 in to illustrate the differences in value. Sapphires are a very cost-effective coloured stone. And they come in every hue of the rainbow. They are tough and will last a lifetime without scratching if...

Tiara Star Ring

Tiara Star Ring

A two-tone gold Tiara ring set with. The ring was hand made from 2 rings, one white and one yellow. It was inspired by a female superhero. To finish it off we set an ocean blue sapphire in the star. Model R774 Star Tiara ring with Ocean Blue Sapphire

Gold Coin Signet Ring

Gold Coin Signet Ring

A client brought us a very large 24mm signet ring in and this 22K half Sovereign. We made a flat cap of gold, welded it over top of the signet space and then added 4 posts to it. Jason then claw set the clients coin onto the top. Customization of client work is always...

Restring Pearl Necklace

Restring Pearl Necklace

A client brought us her natural pearls to restring and decided she wanted 2 of them to make into earrings. We made a gold post to go through each pearl with a ball rivet and attached them to European Lever-backs. Repairing client jewellery uses creativity and...

Bailey Triskele with Diamonds

Bailey Triskele with Diamonds

A client brought us her gold to recycle and remake into this beautiful Bailey Triskele. We also set her engagement diamond and wedding ring diamonds into the interlace too. This Bellchamber designed was inspired by the shape of whale tales. The Whale is the chief of...

Ring Jacket with Diamonds

Ring Jacket with Diamonds

A custom ring jacket to fit with our clients engagement ring (in the center). She wanted to incorporate a Polynesian Spearhead design on the shank to represent a warrior spirit. We set 22 diamonds into the ring jacket. See the photo on the right. We start with a...

One of a Kind Crown Rings

One of a Kind Crown Rings

These custom wedding rings are made of 14K yellow gold with princess cut diamonds and amethysts. The bezel settings were very difficult to make and then set the stones at an even height all the way around. The design is a one of a kind wedding set for our client.

Gemstone Height on a Ring

Gemstone Height on a Ring

Many people want to set gemstones as low as possible in a ring. The lowest style of setting for this is the bezel setting. Diamonds and gemstones which are smaller than 2.25mm can be gypsy set into the band. Larger gems are required to have a setting to hold them. A...